V tomto článku postupne popíšem funkcionalitu a ovládanie tohto pedalboardu, prípadne postupom času aj s prípadnými zmenami, ak by nastali. Na začiatok niekoľko fotiek 🙂

In this article, I will gradually describe the functionality and control of this pedalboard, possibly with possible changes over time, if they occur. To begin with, a few photos 🙂

Nižšie v textoch nájdete aj anglický preklad popisu článku (šedo-modré pole).

Below in the texts you will also find an English translation of the article description (gray-blue field).

Zadný náhľad (back view):

Pred-transportné zabalenie (Pre-transport packaging):

Pred-transportné zabalenie zo zadnej strany (Pre-transport packaging from the back):

Tri prepínače na FM3

Mám ich nastavené tak aby prepínali vybrané banky. Presety 385 až 512 tvoria pri systéme 12 presetov v banke, čísla baniek Banka 32 a vyššie. MIDI kanál mám nastavený na 4.

VIEW 1

Ľavý prepínač:

Funkcia TAP: Categória Bank, funkcia Toggle, primárna banka 32 sekundárna banka 35, Custom label: B32/ B35.

Funkcia HOLD: Categória Bank, funkcia Toggle, zopnutie banky 38, Custom label: B38.

Stredný prepínač:

Funkcia TAP: Categória Bank, funkcia Toggle, primárna banka 33 sekundárna banka 36, Custom label: B33/ B36.

Funkcia HOLD: Categória Bank, funkcia Toggle, zopnutie banky 39, Custom label: B39.

Pravý prepínač:

Funkcia TAP: Categória Bank, funkcia Toggle, primárna banka 34 sekundárna banka 37, Custom label: B34/ B37.

Funkcia HOLD: Categória Bank, funkcia Toggle, zopnutie banky 40, Custom label: B40.

Three switches on FM3

I have them set so that they switch selected banks. Presets 385 to 512 make up 12 bank presets in the system, bank numbers Bank 32 and above. I have the MIDI channel set to 4

VIEW 1

Left Switch:

TAP function: Bank category, Toggle function, primary bank 32 secondary bank 35, Custom label: B32/ B35.

HOLD function: Bank category, Toggle function, switching bank 38, Custom label: B38.

Middle switch:

TAP function: Bank category, Toggle function, primary bank 33 secondary bank 36, Custom label: B33/ B36.

HOLD function: Bank category, Toggle function, switching bank 39, Custom label: B39.

Right Switch:

TAP function: Bank category, Toggle function, primary bank 34 secondary bank 37, Custom label: B34/ B37.

HOLD function: Bank category, Toggle function, switching bank 40, Custom label: B40.

Prepojenie systému

1/ Fractal Audio FM3 a FC-12 sú prepojené ich patentovaným Fats link-om (XLR kábel) a MIDI footcontroler Morlingstar MC-8 vysiela cez MIDI OUT MIDI data na MIDI IN FM3-jky.

2/ Ku konektorom FM-3 Pedal1 a Pedal2 sú pripojene Expression pedále.

3/ K Morlingstar MC-8 sú pripojené TRS káblami 4 switche SW-1 (Hotone), SW-2 (Hotone), SW-3 (BOSS FS-6) a SW-4 (BOSS FS-6).

4/ K FC-12 footcontrolleru Fractal Audio sú pripojené dva (aktuálne zatial len jeden) prepínače BOSS FS-7 na konektoroch SW-1-2 a SW 3-4.

5/ pre prepínane presetov (alebo scén či kanálov FM3) sú využívané prepínače FC-12 ako aj niektoré externé prepínače, ktoré prepínajú aj Layouty na FM3.

System connection

1/ Fractal Audio FM3 and FC-12 are connected by their patented Fats link (XLR cable) and MIDI footcontroler Morlingstar MC-8 sends MIDI data to MIDI IN FM3-jky via MIDI OUT.

2/ Expression pedals are connected to FM-3 Pedal1 and Pedal2 connectors.

3/ 4 switches SW-1 (Hotone), SW-2 (Hotone), SW-3 (BOSS FS-6) and SW-4 (BOSS FS-6) are connected to Morlingstar MC-8 with TRS cables.

4/ Two (currently only one) BOSS FS-7 switches are connected to the Fractal Audio FC-12 footcontroller on connectors SW-1-2 and SW 3-4.

5/ FC-12 switches are used for switching presets (or scenes or FM3 channels) as well as some external switches that also switch Layouts to FM3.

Organizácia presetov Fractal Audio FM3

FM3 obsahuje celkove 512 presetov z toho je prvých 384 Factory Preset (ktoré sú ale prepisovateľné – USER) = Banka A (programy 1 až 128) , Banka B (programy 129 až 256) , Banka C (programy 257 až 384). A potom je Banka D, ktorá je od výroby prázdna (EMPTY), lokácie 385 až 512. Já pre svoje užívateľské presety používam banku D (385 – 512).

Organization of Fractal Audio FM3 presets

FM3 contains a total of 512 presets, of which the first 384 are Factory Presets (which can be rewritten - USER) = Bank A (programs 1 to 128), Bank B (programs 129 to 256), Bank C (programs 257 to 384). And then Bank D, which is factory empty (EMPTY), locations 385 to 512. I use Bank D (385 - 512) for my user presets.

MIDI data (ktorými riadi PC MC-8):

https://mojagitara.com/morningstar-mc8-midi-controller/

Banka A (programy 1 až 128)

Preset 001 =  CC number = 0, CC Value = 0 program Change PC 0 (1)

Preset 128 =  CC number = 0, CC Value = 0 program Change PC 127 (128)

Banka B (programy 129 až 256)

Preset 129 =  CC number = 0, CC Value = 1 Change PC 0 (1)

Preset 256 =  CC number = 0, CC Value = 1 Change PC 127 (128)

Banka C (programy 257 až 384)

Preset 257 =  CC number = 0, CC Value = 2 Change PC 0 (1)

Preset 384 =  CC number = 0, CC Value = 2 Change PC 127 (128)

Banka D ( Prázdne lokácie 385 až 512)

Preset 385 =  CC number = 0, CC Value = 3 Change PC 0 (1)

Preset 512 =  CC number = 0, CC Value = 3 Change PC 127 (128)

MIDI data (by which the PC controls the MC-8):

https://mojagitara.com/morningstar-mc8-midi-controller/

Bank A (programs 1 to 128)

Preset 001 = CC number = 0, CC Value = 0 program Change PC 0 (1)


Preset 128 = CC number = 0, CC Value = 0 program Change PC 127 (128)


Bank B (programs 129 to 256)

Preset 129 = CC number = 0, CC Value = 1 Change PC 0 (1)


Preset 256 = CC number = 0, CC Value = 1 Change PC 127 (128)


Bank C (programs 257 to 384)

Preset 257 = CC number = 0, CC Value = 2 Change PC 0 (1)

Preset 384 = CC number = 0, CC Value = 2 Change PC 127 (128)

Bank D (Empty locations 385 to 512)

Preset 385 = CC number = 0, CC Value = 3 Change PC 0 (1)

Preset 512 = CC number = 0, CC Value = 3 Change PC 127 (128)

Morlingstar MC-8 sú pripojené SW-1 až SW-4 Y TRS káblami

SW-1 (Hotone) = ovláda prepínanie baniek v MC-8 Bank -/+

SW-2 (Hotone) = ovláda prepnutie spodnej vrstvy (ktorá prepína switche MC-8 s 8x scene, na 4x scene a 4x Channel) v MC-8 a zapnutie presetu UKULELE.

SW-3 (BOSS FS-6) = ovláda prepnutie vybraného presetu typu power crunch a Lead – Sólo.

SW-4 (BOSS FS-6) = ovláda prepnutie vybraného presetu typu power clean a Light-medium crunch.

The Morlingstar MC-8s are connected by SW-1 to SW-4 Y TRS cables

SW-1 (Hotone) = controls bank switching in MC-8 Bank -/+, which set different modes 8x scene, 4x scene + 4x channel, or Presets 001 to 384 (Factory).

SW-2 (Hotone) = controls the switching of the lower layer (which switches the MC-8 switches from 8x scene, to 4x scene and 4x Channel) in the MC-8 and turning on the UKULELE preset.

SW-3 (BOSS FS-6) = controls the switching of the selected power crunch and Lead - Solo preset.


SW-4 (BOSS FS-6) = controls the switching of the selected power clean and Light-medium crunch preset.

k Morlingstar MC-8 sú pripojené ešte 2x SW BOSS FS-7, Y TRS káblami

1x BOSS FS-7 = ovláda prepínanie Layout 2 (mám ako základné) a Layout 3.

2x BOSS FS-7 = ovláda prepínanie Layout 4 a Layout 5.

2x SW BOSS FS-7, Y TRS cables are connected to the Morlingstar MC-8

1x BOSS FS-7 = controls the switching of Layout 2 (I have it as basic) and Layout 3.


2x BOSS FS-7 = controls the switching of Layout 4 and Layout 5.

MIDI prepnutie scén (SCENEs) (CC 1 mám definovaný ako kontrolér pre prepínanie scén):

Scéna 1 = CC Nuber 1 CC Value 0 * Scéna 2 = CC Nuber 1 CC Value 1 * Scéna 3 = CC Nuber 1 CC Value 2

Scéna 4 = CC Nuber 1 CC Value 3 * Scéna 5 = CC Nuber 1 CC Value 4 * Scéna 6 = CC Nuber 1 CC Value 5

Scéna 7 = CC Nuber 1 CC Value 6 * Scéna 8 = CC Nuber 1 CC Value 7.

MIDI prepnutie kanálov A, B, C, D (CHANNELs) (CC 3 mám definovaný ako kontrolér pre prepínanie scén):

Kanál A = CC Nuber 3 CC Value 0 * Kanál B = CC Nuber 3 CC Value 1 * Kanál C = CC Nuber 3 CC Value 2 *

Kanál D = CC Nuber 3 CC Value 3.

MIDI switching of scenes (SCENEs) (I have CC 1 defined as a controller for switching scenes):

Scene 1 = CC Number 1 CC Value 0 * Scene 2 = CC Number 1 CC Value 1 * Scene 3 = CC Number 1 CC Value 2


Scene 4 = CC Number 1 CC Value 3 * Scene 5 = CC Number 1 CC Value 4 * Scene 6 = CC Number 1 CC Value 5


Scene 7 = CC Nuber 1 CC Value 6 * Scene 8 = CC Nuber 1 CC Value 7.


MIDI switching of channels A, B, C, D (CHANNELs) (I have CC 3 defined as a controller for switching scenes):

Channel A = CC Number 3 CC Value 0 * Channel B = CC Number 3 CC Value 1 * Channel C = CC Number 3 CC Value 2 *

Channel D = CC Number 3 CC Value 3.

Prepínanie vybraných presetov a funkcií na MC-8 pomocou prepínačov HOTONE:

Bank – =  Banka dole (ľavý Switch 1 Hotone)

Bank + = Banka hore (pravý Switch 1 Hotone

TG (toggle page) = (ľavý Switch 2 Hotone)

UK (preset 503 ) = CC Number 0, CC Value 3, PC 118, Midi Channel 4, (pravý Switch 2 Hotone) MC-8 preset Q

Switching selected presets and functions on the MC-8 using the HOTONE switches:

Bank - = Bank Down (Left Switch 1 Hotone)

Bank + = Bank up (right Switch 1 Hotone

TG (toggle page) = (left Switch 2 Hotone)

UK (preset 503 ) = CC Number 0, CC Value 3, PC: 118, Midi Channel 4 (right Switch 2 Hotone) MC-8 preset Q

 vybraných presetov a funkcií cez MC-8 na FM3 pomocou prepínačov BOSS FS-6:

Ki = (preset 401 MF Euro) CC Number 0, CC Value 3, PC 16, Midi Channel 4, (ľavý Switch 2 Hotone) MC-8 Switch S.

So = (preset 393 RockmSo huslicky) = CC Number 0, CC Value 3, PC 8 Midi Channel 4 (pravý Switch 2 Hotone) MC-8 Switch R.

CL = (preset 384 A-Class 15) CC Number 0, CC Value 2, PC 127, Midi Channel 4, (ľavý Switch 2 Hotone) MC-8 Switch U.

CR = (preset 393 RockmSo huslicky) = CC Number 0, CC Value 3, PC 2, Midi Channel 4 (pravý Switch 2 Hotone) MC-8 Switch T.

Switching selected presets and functions via MC-8 to FM3 using BOSS FS-6 switches:

Ki = (preset 401 MF Euro) CC Number 0, CC Value 3, PC 16, Midi Channel 4, (Left Switch 2 Hotone) MC-8 Switch S.


So = (Preset 393 RockmSo Violin) = CC Number 0, CC Value 3, PC 8 Midi Channel 4 (Right Switch 2 Hotone) MC-8 Switch R.

CL = (preset 384 A-Class 15) CC Number 0, CC Value 2, PC 127, Midi Channel 4, (Left Switch 2 Hotone) MC-8 Switch U.


CR = (Preset 393 RockmSo Violin) = CC Number 0, CC Value 3, PC 2, Midi Channel 4 (Right Switch 2 Hotone) MC-8 Switch T.

Prepínanie LAYOUT cez FC-12 na FM3 a FC-12 pomocou prepínačov BOSS FS-7:

https://mojagitara.com/fractal-fc-6-12-mark-ii-footswitch-manual-1-cast/

https://mojagitara.com/fractal-fc-6-a-fc-12-mark-ii-footswitch-manual-2-cast/

– Prepínač FS-7 úplne vpravo (na obrázku chýba) prepína medzi LAYOUT 2 a 3.

– Prepínač umiestnený medzi dvomi prepínačmi BOSS FS-6 prepína medzi LAYOUT 4 a 5.

LAYOUT 2 – 3 – 4 – 5 mi poskytujú ďalšie možnoti zoradenia presetov, resp. funkcionalít na ovládanie FM3.

Switching LAYOUT via FC-12 to FM3 and FC-12 using BOSS FS-7 switches:

https://mojagitara.com/fractal-fc-6-12-mark-ii-footswitch-manual-1-cast/

https://mojagitara.com/fractal-fc-6-a-fc-12-mark-ii-footswitch-manual-2-cast/

- The FS-7 switch on the far right (missing in the picture) toggles between LAYOUT 2 and 3.


- A switch located between the two BOSS FS-6 switches toggles between LAYOUT 4 and 5.

LAYOUT 2 - 3 - 4 - 5 provide me with additional options for arranging presets, or functionality to control FM3.

Tabuľky a obrázky

LAYOUT 2

LAYOUT 3 až 8

Dnes (24.10.2024) po dlhšom čakaní, dorazil druhý BOSS FS-7 (L4 a L5 označenie) prepínač a tak dokončil kompletizáciu pedalboardu Fractal FM3 + FC-12 + Morningstar MC-8.

Today (24.10.2024) after a long wait, the second BOSS FS-7 (L4 and L5 designation) switch arrived and thus completed the completion of the Fractal FM3 + FC-12 + Morningstar MC-8 pedalboard.

Na stránke sa pracuje 🙂

The article is being worked on :)